CG 1200*1000 Chute feeder

Chute feeder 1.producing time:10days 2.packing:iron sheet or plywood 3.weight:2600 kg 4.size:3600*1357*1310 mm

Chute feeder  

1. Mining Equipment iron/hemitate/chrome/ti ore beneficiation(chute feeder) can be installed on the ground or onto discharge port of ore bin.

2.  The chute bottom plates do the reciprocating movement, the movement frequency is 20-60 times/min and the stroke is 20-200mm.

3. Stroke can be adjusted by the eccentric wheel; the eccentric throw is half of the stroke.

4. According to experience of some mine sites, the eccentric throw should no less than 30mm for cohesive ore.

5. The chute width is 2-2.5 times of maximum feeding granularity.

6.  The biggest chute feeder can supply ore with granularity less than 500mm.

7.  The most common specification is 980 x 1240 chute feeder, with feeding granularity between 350-0mm, which is the best partner of 400 x 600 jaw crusher.

Specification of chute feeder

Specification	Max. particle size(mm)	Feed capacity(t/h)	Power (kw)	dimension L×W×H(mm)	Weight (kg)
CG400×300	200	0-50	3	2820×800×600	792
CG400×400	100	2.5-3	4	2350×725×625	535
CG600×500	205	10.5-25.5	4	2750×910×855	1054
CG700×500	250	10-35	4	3200×950×900	1100
CG980×1240	350	36-90	7.5	3560×1000×1070	1700
CG1000×1900	300	300	7.5	3900×1590×1340	2691
CG1060×2900	300	400-900	25-40	4585×2953×1756	3260
CG1200×1000	400	165-415	15	3600×1357×1310	2600
CG1400×2000	300	50-101	7.5	3920×1777×1103	3472
CG1400×2300	300	430-900	18.5	4460×2090×3804	6895

CG 1200*1000 Chute feeder