Hengchang 6-S tin ore shaking table

Tin ore shaking table: -max.feed size 2mm -capacity30-60t/d -for coarse fine sand,slurry -FRPsurface,corrosion resisting Very high recovery rate 6-S tin ore shaking table   1. 6-S tin ore shaking table of dressing process is in has complex section of tilt bed surface Shang for of, mine grain group from bed surface Shang angle of to mine slot into, while by to sink supply transverse washing water, so mine grain in gravity, transverse water very well and, bed surface for reciprocating does not symmetric movement by produced of inertial and friction of role Xia, by proportion and grain of tiered, and along bed surface for longitudinal movement and along tilt bed surface for transverse movement. The ore and water feeding hole of 6-S tin ore shaking table  2.  Therefore, the proportion and size of different particles along their direction of movement gradually from a to b while fan-shaped shed, respectively, different areas of the port from concentrate and tailings discharge, was eventually divided into concentrate, middlings and tailings. 6-S tin ore shaking table with rich ore ratio, high separation efficiency, the guarding easy, easy to adjust the stroke. Changing landscape gradient and stroke can still maintain a bed running balance spring placed within the box, compact, and be able to arrive at a final concentrate and then the final tailings. The surface Deck of 6-S tin ore shaking table  6-S tin ore shaking table is one of the main equipment of gravity concentration , it is widely used in the selection of tungsten, tin , tantalum, niobium and other rare metals and precious metal ore . Roughing, selected scavenger can be used for different operations ,separating coarse ore  ( 2- 0.5mm) , fine sand ( 0.5 - 0.074mm ), slime ( -0.074mm ), different grain size . Can also be used to choose the iron, manganese ore and coal . When dealing with other minerals such as tungsten , tin , table effective recycling granularity range of 2-0.22 mm. The bottom steel support of6-S tin ore shaking table  Specification of 6-S tin ore shaking table

Name		Coarse sand surface of table	Fine sand surface of table	Ore slime surface of table
Dimension	Length (mm)	4450	4450	4450
	Transmission end width (mm)	1855	1855	1855
	crude ore width (mm)	1546	1546	1546
Max. feeding size (mm)		2	0.5	0.15
Feed amount (t/h)		30-60	10-20	15-25
Feed density (%)		25-30	20-25	15-25
Stroke (mm)		16-22	11-16	8-16
Frequency ( f)		45-48	48-53	50-57
Water quantity added(t/h)		80-150	30-60	10-17
Horizontal obliquity (°)		2°30′-4°30′	1°30′-3°30′	1°-2°
Longitudinal obliquity (%)		1.4	0.92	--
Dressing Area (m2)		7.6	7.6	7.6
Cross-section Shape of table		Rectangular	Saw tooth	triangle
Motor Power (kw)		1.1	1.1	1.1
Transmission Mechanism		Eccentric linkage

 3 different types of 6-S tin ore shaking table shown below:The Transmission Mechanism of 6-S tin ore shaking table   For 6-S tin ore shaking table,we have in stock

Hengchang 6-S tin ore shaking table